On Tue, 25 Mar 2003, Benjamin Reed wrote:
> if you're going to switch back and forth between Apple X11 and XFree86
> 4.3 make sure you always build stuff ('fink install') while Apple X11
> is enabled, or else your stuff won't run right. Apple's X11 is based
> on XFree86 4.2.1, and you can't run binaries built against 4.3 on
> 4.2.1.
Your advice and information is most helpful, gentlemen. Thanks very
much.
I wonder if Apple will switch to 4.3 before the final release? They do
tend to be a bit conservative in these matters, but that would provide
some motivation for maybe holding off on this a little bit.
David Craig
<http://www.panix.com/~dac/>
-------------------------------------------------------
This SF.net email is sponsored by:
The Definitive IT and Networking Event. Be There!
NetWorld+Interop Las Vegas 2003 -- Register today!
http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
_______________________________________________
Fink-beginners mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/fink-beginners
