First Generation Firebird-L Mailing List .........................................................................
New problem: I got the engine/tranny in and cut out the hole for the Tremec shifter base. All is well with that. However, my cross member is about 1/4" too short left to right. The driver's side has two fixed holes and the passenger side has two slotted holes. There's not enough slot, i.e. I would need to pull the subframe in about 1/4" to be able to mount. I compared my old cross member with the new one for the Tremec and they are about the same. Anyone ever had this problem? Can you squeeze the subframe together about 1/4" at the rearward ends? BTW, I looked at the rearward subframe mounts and they were off center, i.e. squeezing the subframe in a little would get them closer to center. Thanks, Sheen _________________________________________________________________ News, entertainment and everything you care about at Live.com. Get it now! http://www.live.com/getstarted.aspx ------------------------------------------------------------------------ Submissions to Firebird-L: <[email protected]> Unsubscribe from Firebird-L: <[EMAIL PROTECTED]> Help: <http://FirstGenFirebird.org/firebird/Firebird-L.html> Classifieds: <http://FirstGenFirebird.org/ubb/> Owner Pictures: <http://FirstGenFirebird.org/show/> Donations: <http://FirstGenFirebird.org/store/cart.mv?999999> FGF Merchandise: <http://FirstGenFirebird.org/store>
