Usually programming the firmware ROMs for Intel NICs requires software 
from Intel.
 may do the trick.

-----Original Message-----
From: flashrom [] On Behalf Of Vadim Bulst
Sent: Tuesday, March 6, 2018 12:51 AM
Subject: [flashrom] Flashing iPXE on Intel i210 on Supermicro X11SSL-F

Dear list,

I'm curious to know if it is possible to flash iPXE to these nics. 
PCI-Id is listed in supported devices - 8086:1533 .

[root@urzospoc01 src]# flashrom -p nicintel_eeprom:pci=01:00.0 flashrom v1.0 on 
Linux 3.10.0-693.17.1.el7.x86_64 (x86_64) flashrom is free software, get the 
source code at

Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found Programmer flash chip "Opaque flash chip" (4 kB,
Programmer-specific) on nicintel_eeprom.
No operations were specified.

When i build a rom for this specific nic the file has a size of 70kB.

Is there a way to get this rom to the nics?



Vadim Bulst

Universit├Ąt Leipzig / URZ
04109  Leipzig, Augustusplatz 10

phone: +49-341-97-33380

flashrom mailing list

Reply via email to