--- In flexcoders@yahoogroups.com, "Tracy Spratt" <tspr...@...> wrote: > > I'm not sure, maybe since modules are independent swf's, but that is way > more complicated than necessary. > > > > Look into the singleton data model. In such a case, you would do: > > 1. in the source module, MyModel.getInstance().id = myTextInput.text; > 2. In the target module, text={ MyModel.getInstance().id } > 3. Or use a changeWatcher if you need to take programmatic action when > "id" changes > > > > Tracy > > > > _____ > > From: flexcoders@yahoogroups.com [mailto:flexcod...@yahoogroups.com] On > Behalf Of thelordsince1984 > Sent: Tuesday, March 03, 2009 12:30 PM > To: flexcoders@yahoogroups.com > Subject: [flexcoders] Re: Modules Communication > > > > --- In flexcod...@yahoogro <mailto:flexcoders%40yahoogroups.com> ups.com, > "thelordsince1984" <loreboa@> wrote: > > > > --- In flexcod...@yahoogro <mailto:flexcoders%40yahoogroups.com> ups.com, > Simon Bailey <simon@> wrote: > > > > > > On the tip for communicating between modules using a framework, > > > PureMVC has a utility called Pipes which helps you accomplish this: > > > > > > http://trac. <http://trac.puremvc.org/Utility_AS3_MultiCore_Pipes> > puremvc.org/Utility_AS3_MultiCore_Pipes > > > > > > ;S > > > > > > On 3 Mar 2009, at 10:10, claudiu ursica wrote: > > > > > > > > > > > You should probably have ca comunication manager something like a > > > > central event dispatcher (I believe the Mate framework already > does > > > > this but i might be mistaking) and register panels within that > > > > scope. so when a panel fires an event the other listening panels > > > > check if the event is adressed to them and actually consume catch > > > > that event... > > > > > > > > there was some guy doing a prof of concept for this google for > ALON > > > > desing pattern ... > > > > > > > > HTH, > > > > Claudiu > > > > > > > > From: thelordsince1984 <loreboa@> > > > > To: flexcod...@yahoogro <mailto:flexcoders%40yahoogroups.com> ups.com > > > > Sent: Tuesday, March 3, 2009 10:53:49 AM > > > > Subject: [flexcoders] Re: Modules Communication > > > > > > > > --- In flexcod...@yahoogro ups.com, Guy Morton <guy@> wrote: > > > > > > > > > > Have you read the section "Using interfaces for module > > > > communication" > > > > > in the docs? That's been working for me. > > > > > > > > > > > > > thanks for the reply.. > > > > > > > > For Guy Morton... > > > > > > > > i've read it but modules are created at runtime so i would have a > > > > maneger that controls communication over modules.is it true? > > > > > > > > For Alex Harui > > > > > > > > how can i achieve the commuication between modules..for example a > > > > module dispatch an event...the event is catch by a manager and then > > > > fires to the rigth destination. ..rember that i have an > > > > application. ..it contains panels and each panel could contain a > > > > module... > > > > > > > > thanks again > > > > > > > > Regards Lorenzo > > > > > > > > > > > > > > > > > > > > > > > > > thanks all, > > > > but is there a simple manner to achieve module to module communication? > > > > suppose this scenario: > > > > i've a module within a panel. it contains a textinput...it fires a > > custom event when the user clicks a button..the event contains an id > > number..an other modules is listen for this event, catchs it at then > > update itself depending on passed id... > > > > thanks again > > Regards Lorenzo > > > is it possible to use localconnection among modules or is a bad way to > achieve module to module communication? >
hi Tracy, i've read your last response... can you explain me the third option: Use a changeWatcher if you need to take programmatic action when "id" changes. thanks in advance Regards Lorenzo