Upgrade your firmware as noted in the release notes to the latest version installed by the installer. You didn't indicate your radio hardware, so I can tell you exactly what version number that would be. I assume it is a F3K so that would be 2.0.1.2
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Adam Grossmyer Sent: Thursday, May 27, 2010 2:07 AM To: [email protected] Subject: [FlexEdge] ATU Hey guys, loving 2.0 so far except one little hickup so far, I was using the ATU and tuning a little higher in the 40 meter band then my Crushcraft R8 is cut for, at the moment it is set for the CW and Digital portions of the band. All was working well and it was definatly tuning alot better then before. I went from 7.030 to 7.150 then to 7.225 when I got this error "Tune failed no RF detected" I restarted everything but still no luck. I am running a quad core I7 2.8 ghz, 2 gig of ram, 1 gig Nvida Graphics card. Windows 7 Professional 64 bit, Psdr version 2.0 SVN 3715 firewire driver is 3.5.2.8028 firware 2.0.0.4. Anyone else having this issue yet? Adam N8MOX _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
