There is no need to uninstall anything. Just upgrade the firmware to
version 2.0.1.2
-Tim
---
W4TME
FlexRadio Systems - Info Management Admin.
"Tune in Excitement"
On 5/27/2010 8:54 AM, Adam Grossmyer wrote:
TIm, I thought I upgraded everything exactly the way it way stated,
Apparently I was wrong. I will be sure to uninstall everything and read all
the prompts again, as this is where I thought I was told to install
2.0.0.4 I do remember installing the latest version, I don't recall the #
and I got some error. It was late and a little preoccupied all could be
contributing factors to my issue with my FLEX 3000 ATU issue. After
shutting everything down for the night I fired everything back up this
morning and the ATU was functioning again. So who knows.
73
Adam
N8MOX
On Thu, May 27, 2010 at 8:30 AM, Tim Ellison<[email protected]> wrote:
Upgrade your firmware as noted in the release notes to the latest version
installed by the installer. You didn't indicate your radio hardware, so I
can tell you exactly what version number that would be. I assume it is a
F3K so that would be 2.0.1.2
-Tim
-----Original Message-----
From: [email protected] [mailto:
[email protected]] On Behalf Of Adam Grossmyer
Sent: Thursday, May 27, 2010 2:07 AM
To: [email protected]
Subject: [FlexEdge] ATU
Hey guys, loving 2.0 so far except one little hickup so far, I was using
the ATU and tuning a little higher in the 40 meter band then my Crushcraft
R8 is cut for, at the moment it is set for the CW and Digital portions of
the band. All was working well and it was definatly tuning alot better
then
before. I went from 7.030 to 7.150 then to 7.225 when I got this error
"Tune failed no RF detected" I restarted everything but still no luck.
I am running a quad core I7 2.8 ghz, 2 gig of ram, 1 gig Nvida Graphics
card. Windows 7 Professional 64 bit, Psdr version 2.0 SVN 3715 firewire
driver is 3.5.2.8028 firware 2.0.0.4. Anyone else having this issue yet?
Adam
N8MOX
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used
for posting topics related to SDR software development and experimentalist
who are using alpha and beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using alpha and beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using alpha and beta versions of the software.
