Tim: The KB is slightly dated... Julius IHY had the exact problem. There are a BUNCH of literal thinkers out there.
Greg On Thu, May 27, 2010 at 8:02 AM, Tim (W4TME) <[email protected]> wrote: > There is no need to uninstall anything. Just upgrade the firmware to > version 2.0.1.2 > > -Tim > --- > W4TME > FlexRadio Systems - Info Management Admin. > "Tune in Excitement" > > > On 5/27/2010 8:54 AM, Adam Grossmyer wrote: > >> TIm, I thought I upgraded everything exactly the way it way stated, >> Apparently I was wrong. I will be sure to uninstall everything and read >> all >> the prompts again, as this is where I thought I was told to install >> 2.0.0.4 I do remember installing the latest version, I don't recall the >> # >> and I got some error. It was late and a little preoccupied all could be >> contributing factors to my issue with my FLEX 3000 ATU issue. After >> shutting everything down for the night I fired everything back up this >> morning and the ATU was functioning again. So who knows. >> 73 >> Adam >> N8MOX >> >> On Thu, May 27, 2010 at 8:30 AM, Tim Ellison<[email protected]> wrote: >> >> Upgrade your firmware as noted in the release notes to the latest version >>> installed by the installer. You didn't indicate your radio hardware, so >>> I >>> can tell you exactly what version number that would be. I assume it is a >>> F3K so that would be 2.0.1.2 >>> >>> >>> -Tim >>> >>> >>> -----Original Message----- >>> From: [email protected] [mailto: >>> [email protected]] On Behalf Of Adam Grossmyer >>> Sent: Thursday, May 27, 2010 2:07 AM >>> To: [email protected] >>> Subject: [FlexEdge] ATU >>> >>> Hey guys, loving 2.0 so far except one little hickup so far, I was >>> using >>> the ATU and tuning a little higher in the 40 meter band then my >>> Crushcraft >>> R8 is cut for, at the moment it is set for the CW and Digital portions >>> of >>> the band. All was working well and it was definatly tuning alot better >>> then >>> before. I went from 7.030 to 7.150 then to 7.225 when I got this error >>> "Tune failed no RF detected" I restarted everything but still no luck. >>> I am running a quad core I7 2.8 ghz, 2 gig of ram, 1 gig Nvida Graphics >>> card. Windows 7 Professional 64 bit, Psdr version 2.0 SVN 3715 firewire >>> driver is 3.5.2.8028 firware 2.0.0.4. Anyone else having this issue yet? >>> Adam >>> N8MOX >>> _______________________________________________ >>> Flexedge mailing list >>> [email protected] >>> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >>> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >>> used >>> for posting topics related to SDR software development and >>> experimentalist >>> who are using alpha and beta versions of the software. >>> >>> _______________________________________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> used for posting topics related to SDR software development and >> experimentalist who are using alpha and beta versions of the software. >> > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > -- Greg Jurrens - K5GJ VP, Sales and Marketing FlexRadio Systems Inc. T: 512-535-5266 x203 E: [email protected] SKYPE: WD0ACD “Tune in Excitement” ™ _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
