TIm, I thought I upgraded everything exactly the way it way stated, Apparently I was wrong. I will be sure to uninstall everything and read all the prompts again, as this is where I thought I was told to install 2.0.0.4 I do remember installing the latest version, I don't recall the # and I got some error. It was late and a little preoccupied all could be contributing factors to my issue with my FLEX 3000 ATU issue. After shutting everything down for the night I fired everything back up this morning and the ATU was functioning again. So who knows. 73 Adam N8MOX
On Thu, May 27, 2010 at 8:30 AM, Tim Ellison <[email protected]> wrote: > Upgrade your firmware as noted in the release notes to the latest version > installed by the installer. You didn't indicate your radio hardware, so I > can tell you exactly what version number that would be. I assume it is a > F3K so that would be 2.0.1.2 > > > -Tim > > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of Adam Grossmyer > Sent: Thursday, May 27, 2010 2:07 AM > To: [email protected] > Subject: [FlexEdge] ATU > > Hey guys, loving 2.0 so far except one little hickup so far, I was using > the ATU and tuning a little higher in the 40 meter band then my Crushcraft > R8 is cut for, at the moment it is set for the CW and Digital portions of > the band. All was working well and it was definatly tuning alot better > then > before. I went from 7.030 to 7.150 then to 7.225 when I got this error > "Tune failed no RF detected" I restarted everything but still no luck. > I am running a quad core I7 2.8 ghz, 2 gig of ram, 1 gig Nvida Graphics > card. Windows 7 Professional 64 bit, Psdr version 2.0 SVN 3715 firewire > driver is 3.5.2.8028 firware 2.0.0.4. Anyone else having this issue yet? > Adam > N8MOX > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
