Dan, Make sure that you're changing the buffer size in PowerSDR's Setup Form -> Audio Tab (as opposed to changing it in the radio control panel). This will ensure that the application is aware of the change and makes all of the necessary changes to the DSP, Audio, etc to handle the smaller buffers.
Eric Wachsmann FlexRadio Systems On Tue, Jun 1, 2010 at 12:29 PM, dan edwards <[email protected]> wrote: > ok, i put psdr 2 on my laptop. win 7 home 32 bit. ibm T-60. ti-chipset > express firewire card. 4gb ram. dpc's under 200 uS. with ethernet internet. > 800 usec spikes every 10 sec with wireless internet....but it runs anyway !! > found i had to run the audio buffers up to 1024 to get received audio to > sound 'clean'. with EITHER internet connection... > if i start the 8028 firewire driver software, i see i still have choices of > normal, safe mode 1, 2, and 3...but i dont seem to have access to the > various modes from inside PSDR 2. > even fiddled a bit with 'process priority'...didnt make much difference. > what am i missing? or "shut up and just be happy it's running" ?? > 73, w5xz dan > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
