OK, so this is probably something I've done incorrectly, as everyone else seems to be having zero issues, but....
Installed 2.0.19 with no problems. I didn't remove 2.0.16. Started up the new software, it went through it's stuff, did a RX calibration, etc. Started PSDR, and all seemed normal. So far, so good. On 40M, at 7.028 MHz, not too much going on above that frequency on the panadapter display, but I'm hearing stuff on that freq and see activity below. Tune up to 7.029 MHz, and all kinds of signals jump out of nowhere, the band is crazy, and I remember it's a contest weekend. But wait; why didn't I see all this activity 1 KHz ago? It's repeatable, and I have screen shots. Also, the noise floor seems to be 10 - 20 db higher. Not a huge problem, as I can revert to 2.0.16 and all is well. Any ideas? -- Regards and 73, John Lennerton, W1JCL _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
