John, Stop PowerSDR , close and then power down the radio and remove the DC for 30 seconds, power up the radio and restart PowerSDR. The new settings in the EEPROM do not seem to get set until PowerSDR restarts. Radio reset does not hurt either.
Next would be a database reset. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: [email protected] <[email protected]> Web: www.flexradio.com <http://www.flex-radio.com> <a href="http://www.crossloop.com/FlexRadioSupport?type=email"; target="_blank"><img border="0" src=" http://www.crossloop.com/images/badge-sm-gray.jpg"; alt="Get help from Dudley Hurry!"/></a> On Fri, Feb 18, 2011 at 10:17 PM, John Lennerton <[email protected]>wrote: > OK, so this is probably something I've done incorrectly, as everyone else > seems to be having zero issues, but.... > > Installed 2.0.19 with no problems. I didn't remove 2.0.16. Started up the > new software, it went through it's stuff, did a RX calibration, etc. > > Started PSDR, and all seemed normal. So far, so good. > > On 40M, at 7.028 MHz, not too much going on above that frequency on the > panadapter display, but I'm hearing stuff on that freq and see activity > below. > > Tune up to 7.029 MHz, and all kinds of signals jump out of nowhere, the > band > is crazy, and I remember it's a contest weekend. But wait; why didn't I > see > all this activity 1 KHz ago? It's repeatable, and I have screen shots. > > Also, the noise floor seems to be 10 - 20 db higher. > > Not a huge problem, as I can revert to 2.0.16 and all is well. > > Any ideas? > > -- > Regards and 73, > > John Lennerton, W1JCL > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
![http://www.crossloop.com/images/badge-sm-gray.jpg"](http://www.crossloop.com/images/badge-sm-gray.jpg"){kind=link}