UPDATE:
I changed my Firewire driver from the legacy Driver to the T.I. driver, it
has NOT lost transmit Power after 20 minutes of changing Bands, or changing
Sample Rates.
BUT I wont be sure it fixed it until I use it for a while and start turning
DDUTIL functions back on.
73's and Hope this helps others.
Bret
WX7Y
-----Original Message-----
From: Bret Mills [mailto:[email protected]]
Sent: Friday, February 18, 2011 9:39 PM
To: 'Tim Ellison'
Subject: RE: [FlexEdge] Announcing PowerSDR(TM) v2.0.19 RC1 Release
Candidate
NOT Here,
I did a DB Reset several times, turned the Radio off, Pulled power off the
radio for 10 minutes, removed and reinstalled the software package.
When I originally installed I removed 2.0.16 completely and rebooted before
I installed 2.0.19.
It does it after changing the band many times to tune the AT-Auto tuner,
worse when running DDUTIL as the other gentleman reported.
It is real prevalent if I stop PowerSDR then change the sample rate a few
times.
You just think it is fixed then you do something and the Power Output goes
to 0.
It does NOT take a data base reset like it used too to fix it, but rather
shutdown PowerSDR so it doesn't lock up and reset power to the Radio, seems
more like a Firmware / Driver issue then a PowerSDR issue.
Windows 7 64 bit
Bret Mills
WX7Y
-----Original Message-----
From: Tim Ellison [mailto:[email protected]]
Sent: Friday, February 18, 2011 8:46 PM
To: Bret Mills
Subject: Re: [FlexEdge] Announcing PowerSDR(TM) v2.0.19 RC1 Release
Candidate
A db reset fixed Richard's issue.
-Tim
--------
Sent from my iPhone
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
