OK I really do not understand what for the MUTE is.
If you want to transmit with other TX - OK just press PTT on the SDR and
set the TX gain to 0 and you are all done. In any case you do NEED some
external relay to take care of the antenna so why not for the PTT too !
73 !
Jiri
OK1RI
On Wed, 14 Dec 2005, Jim Lux
wrote:
At 08:28 AM 12/14/2005, Larry W8ER wrote:
Eric .. I would like to eliminate all other receivers from my ham shack.
The Flex is the best. Occasionally I like to fire up an old boatanchor AM
transmitter or something other than the Flex transmitter. I am looking for
a way to mute the Flex receiver. Killing the audio is fairly simple but in
doing so the Flex hears the big local signal and upon return to receive,
the AGC has to recover and so forth. A good clean mute is what I am after.
I think the confusion might be with what "mute" means, because I think most
folks thought it meant shutting off the AF output, but what you mean is an
"RF" mute, or at least one that freezes the AGC.
Jim
