Gary, Do NOT confuse the "Line In" and "Line Out" pins on the FlexWire connector with any type of audio signals. They are communications lines for a firewire-type communications port. The FlexWire connector is for communicating with 3rd-party peripherals, such as the Universal Controller Board (UCB), which will extend the hardware capabilities of the FLEX-3000/FLEX-5000 series of transceivers. There are no such 3rd-party peripherals available yet. However, some are in development, including a FlexWire version of the UCB (If I am mistaken here, someone please let me know).
Bottom line: The FlexWire connector does NOT provide access to any analog audio signals, either TX audio or RX audio. It only provides for communication with 3rd-party peripherals, support for which will have to be included in PowerSDR when they are released. 73, Ray, K9DUR _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
