Innis Cunningham writes: > Hi Guys > I know this has been discussed before but the VOR pointer > seems to malfunction.Sometimes 180 deg to the station sometimes > 90deg and sometimes anywhere. > I am using the property radios/nav/radials/actual-deg. > There is a property for the ADF called needle-deg this property > works perfectly.The needle points to the station at all times. > Is there any reason why the code that drives the ADF needle > could not be used to drive the VOR needle. > After all they are only pointing to the direction the radio signal > is coming from.
Can you report a specific location, heading, frequency, altitude, etc. where you see a problem? Based on your description of the problem, you might not be aware that the VOR needle does not point to the VOR station. Instead, you tune the frequency, and then dial in the target radial. The VOR needle will tell you if you are left or right of the radial you have selected. It's a bit more to it than that, but that's the general idea. Certainly bugs can creep in unexpectedly, so if you still think there's a problem, please send us some details so we can replicate it. Thanks, Curt. -- Curtis Olson HumanFIRST Program FlightGear Project Twin Cities curt 'at' me.umn.edu curt 'at' flightgear.org Minnesota http://www.flightgear.org/~curt http://www.flightgear.org _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel
