Method 1: Turn off magnetos/set mixture to full lean (if piston engined) Method 2: Toggle cutoff for desired engine (both) Method 3: Equipment > System Failures > MTBF (Mean Time Between Failures) of desired engine in seconds. Unchecking the checkbox will cause the selected engine to fail. Press Apply and then OK. > Hello, > > Is it possible to simulate an engine failure during takeoff (or at any > flight stage) in Flightgear? If the answer is positive, is there an > aircraft model (with two or more engines, of course) ready to do that? > > I've tried to set "set-running" property to false or 0 in the property > browser while in flight, but this is ignored, the property retaining > its "true" value. > > Fabian. > ------------------------------------------------------------------------------ > OpenSolaris 2009.06 is a cutting edge operating system for enterprises > looking to deploy the next generation of Solaris that includes the latest > innovations from Sun and the OpenSource community. Download a copy and > enjoy capabilities such as Networking, Storage and Virtualization. > Go to: http://p.sf.net/sfu/opensolaris-get > _______________________________________________ Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel
------------------------------------------------------------------------------ OpenSolaris 2009.06 is a cutting edge operating system for enterprises looking to deploy the next generation of Solaris that includes the latest innovations from Sun and the OpenSource community. Download a copy and enjoy capabilities such as Networking, Storage and Virtualization. Go to: http://p.sf.net/sfu/opensolaris-get _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
