Hi Geoff,
> Then the next tab [HGT Chop] did a fantastic job of
> setting up <some_root>/work/SRTM-30/<chunk>/<tile>/
> <index>.fit.gz and arr.gz. Great stuff... must check what
> terrafit parameters were used, since this greatly influences
> the elevation mesh to be used...
Currently it doesn't set any parameters for terrafit. I will add the
minnodes, maxnodes and maxerror options soon.
> Then onto [Genapts] tab. A little surprised on the 'insistence'
> that apt.dat.gz be de-gzipped first. Surely that could be
> handled in Qt?
Sounds like a nice thing for the todo-list ;)
> Wait, looking at the code, I see the genapts command runs
> 'genapts'. and waits until it ends, and only then outputs
> to the log window... So for some reason genapts only
> ran for ONE airport - YPEC.btg.gz!!!
>
> Re-running the command line from log.txt manually, and
> this got ALL the airports in my chosen min-max region
> built... some 33 airports, after about an hour or so
> running... and ended with the HAPPY -
> [FINISHED CORRECTLY]
>
> So the question is more why when run inside tg-gui
> I only get ONE? Will leave that for another day ;=))
Hm, would be nice if we could solve that one yeah. I'll check if it
works okay here, or if it is really a bug in the GUI.
> So now I get the above 'cs_....' list. It seems a good
> guess could be made at setting the 'Material' column
> from the mapserver names. Or EVEN get the mapserver
> to use the actual TG material names where possible,
> perhaps still with 'cs_' pre-pended!
Also one for the todo-list: GUI filling the material list with "suggested"
materials.
> Got my 11 shapefiles aligned with a Material, so
> push the big button [Decode ...]... Some question
> in my mind as to where is the 'boundary' set?
OGR decode doesn't need a boundary to be set ;)
> BUT YOW, TerrGUI.exe CRASHED, with the MS 'sorry for the
> inconvenience' dialog ;=(( I decide to NOT send the
> error to MS ;=))
Right, that error (caused by me not knowing what I did :p) was fixed
this afternoon :) Fix is pushed to Gitorious and new windows build is
available at the forum.
> After adding a number, the log.txt shows it ran
> 'ogr_decode' for each items, BUT nothing was output???
Hm, nothing in project/work?
> Why is that ogr_decode and not shape_decode???
They basically do the same, but I was told someday that ogr_decode is
the better one...
Thanks for the feedback, it is really appreciated!
Cheers,
Gijs
------------------------------------------------------------------------------
WhatsUp Gold - Download Free Network Management Software
The most intuitive, comprehensive, and cost-effective network
management toolset available today. Delivers lowest initial
acquisition cost and overall TCO of any competing solution.
http://p.sf.net/sfu/whatsupgold-sd
_______________________________________________
Flightgear-devel mailing list
Flightgear-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
