nice to see fgcom stepping forward. Installing the fgcom-server(delta384) was my first touch with Asterisk, amassing power full tool. Looking back see a lot of bandwith.
my suggestions for improvement: - bandwith : the fgcom-client(iax) didn't close upstream only the mic, i have deep in mind that the iax-client can detect silent and should not send the silent over the net. - Share bandwidth width other servers: splitting the ground stations to several server(all we have) could improve the load for each. The dialbook could have the server column, so the fgcom can dial the ground station on a specific server. this need a update process for the dialbook(may bee git). - Dialbook get Nummer : the search should not return the first frequency, the nearest in Range is more suitable. - Thinking about center controller: the dialbook could summarize all frequencies of the control area and dials one number on the server. So we have one desk for the center. Especially for OpenRadar it will be an interesting feature. - As main problem i see in the ranges of the frequencies: the apt.dat provides no info about ranges. And there are a lot of intersections between frequencies. Approaching EDDP from east is no fun for the controller. The pilot dials to all other airports in the near until it intercepts the ils. IMO we should maintain a own dialbook. May bee based on apt.dat (or more realistic infos ???) + manual correction of used(atced) airports. And for this airports we need a working solution to increase the fun for atc & pilot. This is the point where realism meets fg reality, we have hopefully one atc at the airport and he needs a 100nm range frequency at the tower. All frequencies could have the real range and each airport gets a special frequency "all in one" (100nm). So we can play real and real. Hopefully a few interesting points. Regards, Dirk ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
