On Mon, 2007-10-01 at 19:49 -0400, Brian Keener wrote: > I seem to have an issue in Flightgear. I usually use one of the Cessna > Aircraft and when I start the program in Windows and the display starts it > seems the plane is already rolling and if I try to brake to stop on the end > of the runway it will pull right. It will eventually stop but sometimes I > am off the runway. I thought it was related to my joystick (Saitek Cyborg > EVO Force) and tried revving the engine and then braking just to make sure > things were calibrated and responding but it still always seems to want to > be rolling and pull to the right - I did find if I was quick with the > parking brake that would stop it and then I could release it when I was > ready and start my take off roll. > > Any thoughts or ideas as to how I can check or fix this. > > bk
You can have the sim start with the parking brake engaged, either: add the switch "--prop:/controls/gear/brake-parking=1" to the command line, or add /controls/gear/brake-parking=1 to advanced/properties in the FGRun GUI program, or put the line "--prop:/controls/gear/brake-parking=1" in your .fgfsrc file. Ron ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Flightgear-users mailing list Flightgear-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-users
