On Tue, 2 Oct 2007 23:21:45 -0500 Larry Wyble <[EMAIL PROTECTED]> wrote:
> On Tue, 2 Oct 2007 21:07:22 -0700 > Syd&Sandy <[EMAIL PROTECTED]> wrote: > > > or ..... > > turn on the HUD and see if the rudder is centered .... > > > > > NO offense guys but I have done all this stuff. I have been playing > around with FLightGear for years and it has always done the same > thing. I have upgraded my OS several times and I just reinstalled > FLightGear after another upgrade to new equipment and OS and > FLightGear is still pulling hard left off the runway. Like I said > in the beginning of this, the only one that doesn't pull hard left on > taxi is the beech99-cicu. > > I brought this subject up a couple of years ago and never got a > remedy for this. Are you telling me that none of the aircraft you fly > in FlightGear does this???? If so it could be that the mouse > programming is off somewhat. If you are using a Joystick and don't > have this problem then I must suspect the mouse code. > > Let me know if this is the case with you and if so I will have a > place to start searching. > > Thanks. OK I didnt know this was an ongoing problem... No , Ive never had this problem , other than the crosswind , or the autopilot disconnecting and leaving the trim stuck at some excessive value ... -- Syd&Sandy <[EMAIL PROTECTED]> ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Flightgear-users mailing list Flightgear-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-users
