Thanks mate, I'll give it a shot. Keith
----- Original Message ---- From: drew <[EMAIL PROTECTED]> To: FlightGear user discussions <flightgear-users@lists.sourceforge.net> Sent: Saturday, February 2, 2008 8:49:44 PM Subject: Re: [Flightgear-users] Moving maps? On Sunday 03 February 2008 05:18:34 [EMAIL PROTECTED] wrote: > Okay, I will hang in there........Let's see if we can't solve my problems > then! > > Keith G'day Keith, To make it a little clearer, here are the options I use to start in multiplayer mode: --callsign=drew # <--- change this to "keith" or something... --enable-ai-models --multiplay=out,10,mpserver02.flightgear.org,5000 --multiplay=in,10,10.1.1.2,5000 # <--- you will have to change "10.1.1.2" to whatever your own behind-the-router IP address is. Run sudo ifconfig -a to find what this is for your set-up. Once running, point your browser to http://mpmap02.flightgear.org/ and you should see yourself on the map! If not, get back to us. Hang in there!! BTW, if you are launching fgfs from a terminal did you know that all your options can be saved in a config file, usually ~/.fgfsrc, which is read by fgfs on startup? Just a text file - one option per line. This will save you much typing. :) HTH, Drew ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Flightgear-users mailing list Flightgear-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Flightgear-users mailing list Flightgear-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-users
