Hi Phil,
>- It would be really nice to be able to assign pinnames in the
>schematic library (and their electrical type), just like one now does
>when assigning netnames in Schematic. Define the first one, and then
>click on the pins, and the names are assigned with an autoincrement,
> and the same electrical type.
Mine already does....
I'm using 99SE SP6. I've just tested it and I'm able to place a pin
labelled, say:
Pin# = 1; PinName = D0
Successive pin placements will auto-increment....
Pin# = 2; PinName = D1
Pin# = 3; PinName = D2, etc.
Maybe there is a hidden checkbox somewhere, but I don't ever remember not
having this facility.
Sometimes though the auto-increment should be auto-decrement, say in the
case where:
Pin#10 = D0
Pin#9 = D1.....etc.
Maybe a selectable Increment / decrement box somewhere....?
LINDEN DOYLE
Product Development Engineer
Zener Electric Pty Ltd
[EMAIL PROTECTED]
Ph: +61 2 9795 3600
Fax: +61 2 9795 3611
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
