Thanks Larry. Installation is fine. I can able to access GUI and I am getting the status message as Status of the scheduler is successful.
I hope now it works fine. Let me try out to use the fossology tool now. If I get any doubts, I will come up with my queries. Thanks and Regards, Mohamed Fazil On Tue, Nov 6, 2012 at 12:07 PM, Shi, Yao-Bin (Larry, Open Source Program Office) <[email protected]> wrote: > Hi Mohamed, **** > > ** ** > > I am sorry that the link > www.fossology.org/projects/fossology/wiki/Install_2_1 are the steps for > source installation.**** > > I think you installed FOSSology from packcage, right? If yes, you do not > have to do more configurations, please ignore > www.fossology.org/projects/fossology/wiki/Install_2_1**** > > ** ** > > Just checking the below things.**** > > **1. **Can you access fossolgy from GUI Via http://HOSTNAME/repo/ ? > please replace HOSTNAME with your real hostname.**** > > If cannot, please **** > > sudo cp /usr/etc/fossology/conf/fo-apache.conf /etc/apache2/conf.d/, then > **** > > sudo /etc/init.d/apache2 restart**** > > try to access fossolgy from GUI again.**** > > **2. **Is the scheduler running? **** > > On GUI, Login with fossy/fossy, then **** > > click on [Admin]à[Scheduler] menu, on the Scheduler Administration page, > click on Submit, **** > > you will get the states msg on the top of this page.**** > > If the scheduler is not running.**** > > On cli, please run **** > > sudo /etc/init.d/fossology start**** > > if you still can not start the scheduler, please grab the error msg > /var/log/fossology/fossology.log to me**** > > ** ** > > Hope it helps.**** > > -Larry**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Mohamed Fazil > *Sent:* Tuesday, November 06, 2012 1:53 PM > *To:* Stangel, Dan > > *Cc:* [email protected] > *Subject:* Re: [FOSSology] Help needed to installFOSSology Tool**** > > ** ** > > Hi Dan, > > > Thanks a lot for your help. > > But still i need your help and i need to get clarified for few queries. > > Bob Gobeille has given me the link( > www.fossology.org/projects/fossology/wiki/Install_2_1 ) for installation > steps. > First i want know these configuration steps are mandatory to use fossology > tool. > I tried those steps. Below are the issues which i faced in post > installation.**** > > Section 1 - Short Installation Instructions**** > > ** ** > > # utils/fo-cleanold --> Where will I get fo-cleanold script. utils > folder is not available. > # utils/fo-installdeps --> Where will I get fo-cleanold script. utils > folder is not available. > > 3rd step had run properly(via root user) > > **** > > 3. Adjust the kernel shmmax (described in detail in section 2.1.3)**** > > # echo 512000000 > /proc/sys/kernel/shmmax**** > > # echo "kernel.shmmax=512000000" >> /etc/sysctl.conf > > Do you have any comments to be taken care while configuring PostgreSQL,PHP > and Apache as mentioned in the link. > > *2.2.2 Automated Post-Installation* > > **** > > > /usr/local/lib/fossology/fo-postinstall --> This script is not > available(fossology folder itself not available over there).**** > > ** ** > > ** ** >
_______________________________________________ fossology mailing list [email protected] http://lists.fossology.org/mailman/listinfo/fossology
