Hi Mohamed, Congratulations. You can upload something to try. Anything please tell me.
-Larry From: Mohamed Fazil [mailto:[email protected]] Sent: Tuesday, November 06, 2012 2:53 PM To: Shi, Yao-Bin (Larry, Open Source Program Office) Cc: Stangel, Dan; [email protected] Subject: Re: [FOSSology] Help needed to installFOSSology Tool Thanks Larry. Installation is fine. I can able to access GUI and I am getting the status message as Status of the scheduler is successful. I hope now it works fine. Let me try out to use the fossology tool now. If I get any doubts, I will come up with my queries. Thanks and Regards, Mohamed Fazil On Tue, Nov 6, 2012 at 12:07 PM, Shi, Yao-Bin (Larry, Open Source Program Office) <[email protected]<mailto:[email protected]>> wrote: Hi Mohamed, I am sorry that the link www.fossology.org/projects/fossology/wiki/Install_2_1<http://www.fossology.org/projects/fossology/wiki/Install_2_1> are the steps for source installation. I think you installed FOSSology from packcage, right? If yes, you do not have to do more configurations, please ignore www.fossology.org/projects/fossology/wiki/Install_2_1<http://www.fossology.org/projects/fossology/wiki/Install_2_1> Just checking the below things. 1. Can you access fossolgy from GUI Via http://HOSTNAME/repo/ ? please replace HOSTNAME with your real hostname. If cannot, please sudo cp /usr/etc/fossology/conf/fo-apache.conf /etc/apache2/conf.d/, then sudo /etc/init.d/apache2 restart try to access fossolgy from GUI again. 2. Is the scheduler running? On GUI, Login with fossy/fossy, then click on [Admin]-->[Scheduler] menu, on the Scheduler Administration page, click on Submit, you will get the states msg on the top of this page. If the scheduler is not running. On cli, please run sudo /etc/init.d/fossology start if you still can not start the scheduler, please grab the error msg /var/log/fossology/fossology.log to me Hope it helps. -Larry From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Mohamed Fazil Sent: Tuesday, November 06, 2012 1:53 PM To: Stangel, Dan Cc: [email protected]<mailto:[email protected]> Subject: Re: [FOSSology] Help needed to installFOSSology Tool Hi Dan, Thanks a lot for your help. But still i need your help and i need to get clarified for few queries. Bob Gobeille has given me the link( www.fossology.org/projects/fossology/wiki/Install_2_1<http://www.fossology.org/projects/fossology/wiki/Install_2_1> ) for installation steps. First i want know these configuration steps are mandatory to use fossology tool. I tried those steps. Below are the issues which i faced in post installation. Section 1 - Short Installation Instructions # utils/fo-cleanold --> Where will I get fo-cleanold script. utils folder is not available. # utils/fo-installdeps --> Where will I get fo-cleanold script. utils folder is not available. 3rd step had run properly(via root user) 3. Adjust the kernel shmmax (described in detail in section 2.1.3) # echo 512000000 > /proc/sys/kernel/shmmax # echo "kernel.shmmax=512000000" >> /etc/sysctl.conf Do you have any comments to be taken care while configuring PostgreSQL,PHP and Apache as mentioned in the link. 2.2.2 Automated Post-Installation /usr/local/lib/fossology/fo-postinstall --> This script is not available(fossology folder itself not available over there).
_______________________________________________ fossology mailing list [email protected] http://lists.fossology.org/mailman/listinfo/fossology
