That is correct. The FES has a default of 255 VEs and can be increased
to 512 VEs.
Mischa
Additional IPs do not get populated to the BPs and they can not be
used for load balancing if I remember correctly.
FastIrons are a different product with different limits.
R, Oliver
At 01:16 15.11.2008, Stephan van Hienen wrote:
What is exatly happening when i create a new vlan with ve/ip ?
[EMAIL PROTECTED](config)#vlan 210 name testvlan by port
[EMAIL PROTECTED](config-vlan-210)# tagged ethe 3 to 4
added tagged port ethe 3 to 4 to port-vlan 210.
[EMAIL PROTECTED](config-vlan-210)# router-interface ve 61
[EMAIL PROTECTED](config-vlan-210)#interface ve 61
[EMAIL PROTECTED](config-vif-61)# port-name "* VLAN210 gateway *"
[EMAIL PROTECTED](config-vif-61)# ip address 192.168.134.1
255.255.255.248
Error! Maximum number of IP reached 64
[EMAIL PROTECTED](config-vif-61)# ip vrrp vrid 61
[EMAIL PROTECTED](config-vif-61-vrid-61)# owner
[EMAIL PROTECTED](config-vif-61-vrid-61)# ip-address 192.168.134.1
[EMAIL PROTECTED](config-vif-61-vrid-61)# activate
VRRP router 61 for this interface is activating
I receive the error Maximum number of IP reached 64, but It looks
like the vlan/ve are still activated ?
(and I can ping the ip 192.168.134.1 from a remote device)
But still looks like I have to search for a new device (extra maybe)
I can keep the servers which need loadbalancing on the serveriron.
So what about the fastiron (FES12GCF) same limitation ?
Thnx,
Stephan
On Fri, 14 Nov 2008, Mischa Peters wrote:
This is a limit on all the ServerIron platforms.
Mischa
Interesting. Is this limit the same on all ServerIrons in the
product
line? or just the 4g?
-Ryan
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Oliver
Adam
Sent: Friday, November 14, 2008 6:22 AM
To: Mischa Peters; Stephan van Hienen
Cc: [email protected]
Subject: Re: [f-nsp] ip (ve) limit on serveriron 4g
Mischa is correct - you can define up to 64 IPs which is a hard
limit. I am sorry for that.
R, Oliver
At 21:21 13.11.2008, Mischa Peters wrote:
> Hi Stephan,
> > The amount of virtual interfaces is also (unfortunately)
limited by
> the 64 IP limit.
> This is a combined limit for both source-ips and VEs.
> > Mischa
> > > Hmms didn't think I would hit the serveriron's limit that
soon... :(
> > But how is this related to the maximum ammount of virtual-
interface
> > then ? (which can be 512)
> > > > So no other options than just buying another pair of
foundry's ?
> > (not sure if I need to buy serverirons, since i would be able
to
> > move ve's which don't use loadbalancing)
> > > > Thnx,
> > > > Stephan
> > > > > > > > On Thu, 13 Nov 2008, Mischa Peters wrote:
> > > > > You can not change that limit, that is a hard limit on
the BPs of
> > > the ServerIron.
> > > > > > Mischa
> > > > > > > When I tried to create another vlan with ve I got
the following
> > > > message :
> > > > Error! Maximum number of IP reached 64
> > > > In the past I also had a maximum vlan, which I could fix
by using
> > > > system-max vlan.
> > > > But I can't find anything about this ip limit in the
documentation/
specs.
> > > > Any hints how to fix this ?
> > > > _______________________________________________
> > > > foundry-nsp mailing list
> > > > [email protected]
> > > > http://puck.nether.net/mailman/listinfo/foundry-nsp
> > _______________________________________________
> foundry-nsp mailing list
> [email protected]
> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
