Thanks. Looping a copper cable doesn't bring the port up, and the FESX is forwarding (see the following--ServerIron is connected via copper to the gig link, port 26):
FES2402 Switch#sho int bri Port Link State Dupl Speed Trunk Tag Priori MAC Name 1 Down None None None None No level0 000c.db1d.4750 2 Down None None None None No level0 000c.db1d.4751 3 Down None None None None No level0 000c.db1d.4752 4 Down None None None None No level0 000c.db1d.4753 5 Down None None None None No level0 000c.db1d.4754 6 Down None None None None No level0 000c.db1d.4755 7 Down None None None None No level0 000c.db1d.4756 8 Down None None None None No level0 000c.db1d.4757 9 Down None None None None No level0 000c.db1d.4758 10 Down None None None None No level0 000c.db1d.4759 11 Down None None None None No level0 000c.db1d.475a 12 Down None None None None No level0 000c.db1d.475b 13 Down None None None None No level0 000c.db1d.475c 14 Down None None None None No level0 000c.db1d.475d 15 Down None None None None No level0 000c.db1d.475e 16 Down None None None None No level0 000c.db1d.475f 17 Down None None None None No level0 000c.db1d.4760 18 Down None None None None No level0 000c.db1d.4761 19 Down None None None None No level0 000c.db1d.4762 20 Down None None None None No level0 000c.db1d.4763 21 Down None None None None No level0 000c.db1d.4764 22 Down None None None None No level0 000c.db1d.4765 23 Up Forward Full 100M None No level0 000c.db1d.4766 24 Up Forward Full 100M None No level0 000c.db1d.4767 25 Up Forward Full 1G None No level0 000c.db1d.4768 26 Up Forward Full 1G None No level0 000c.db1d.4769 FES2402 Switch# ServerIronGT E-1#sho int bri Port Link State Dupl Speed Trunk Tag Priori MAC Name 4/1 Down None None None None No level0 000c.dbb5.b660 4/2 Down None None None None No level0 000c.dbb5.b661 4/3 Down None None None None No level0 000c.dbb5.b662 4/4 Down None None None None No level0 000c.dbb5.b663 4/5 Down None None None None No level0 000c.dbb5.b664 4/6 Down None None None None No level0 000c.dbb5.b665 4/7 Down None None None None No level0 000c.dbb5.b666 4/8 Down None None None None No level0 000c.dbb5.b667 4/9 Down None None None None No level0 000c.dbb5.b668 4/10 Down None None None None No level0 000c.dbb5.b669 4/11 Down None None None None No level0 000c.dbb5.b66a 4/12 Down None None None None No level0 000c.dbb5.b66b 4/13 Down None None None None No level0 000c.dbb5.b66c 4/14 Down None None None None No level0 000c.dbb5.b66d 4/15 Down None None None None No level0 000c.dbb5.b66e 4/16 Down None None None None No level0 000c.dbb5.b66f ServerIronGT E-1# Thanks again On Fri, Feb 20, 2009 at 10:10 AM, Seth Fiermonti <[email protected]>wrote: > From your output, you are not getting link. Be default, all of he ports > will be in a blocking state. Look at this line: > > ServerIronGT E-1#sho int e 4/9 > GigabitEthernet4/9 is down, line protocol is down > > Loop back a copper cable on the J-B16GC...does line protocol go UP? Also, > send over an output of show interface brief for BOTH the SI and FESX. > > Thanks > > > > On 2/20/09 12:51 PM, "Chuck Ufarley" <[email protected]> wrote: > > This might be a silly question, but I can't get a port to come up on a > ServerIron. I enabled the interface and connected it properly to a > FES-X2402 switch, but the J-B16GC and the J-B2Gx ports just won't come up > and forward. The cards have worked in other configs, but I can't get > anything to come out of "blocking" mode. Here are the shows (any help > greatly appreciated): > > ServerIronGT E-1#sho run > !Building configuration... > !Current configuration : 378 bytes > ! > ver 11.0.00TD4 > ! > module 1 bi-0-port-wsm6-management-module > module 3 bi-jc-2-port-gig-module > module 4 bi-jc-16-port-gig-copper-module > ! > context default > ! > aaa authentication web-server default local > no enable aaa console > telnet server > username admin password ..... > snmp-server > ! > interface ethernet 4/9 > ip address 192.168.0.77 255.255.255.0 > ! > end > > ServerIronGT E-1#sho run > !Building configuration... > !Current configuration : 378 bytes > ! > ver 11.0.00TD4 > ! > module 1 bi-0-port-wsm6-management-module > module 3 bi-jc-2-port-gig-module > module 4 bi-jc-16-port-gig-copper-module > ! > context default > ! > aaa authentication web-server default local > no enable aaa console > telnet server > username admin password ..... > snmp-server > ! > interface ethernet 4/9 > ip address 192.168.0.77 255.255.255.0 > ! > end > > ServerIronGT E-1#sho mod > Module Status Ports Starting MAC > S1: B0GMR WSM6 Management Module, SYSIF 2 M6, ACTIV 0 > S2: > S3: J-BxG2 JetCore Gig Fiber Module, SYSIF OK 2 000c.dbb5.b640 > S4: J-BxGC16 JetCore Gig Copper Module, SY OK 16 000c.dbb5.b660 > ServerIronGT E-1#sho int e 4/9 > GigabitEthernet4/9 is down, line protocol is down > Hardware is GigabitEthernet, address is 000c.dbb5.b668 (bia > 000c.dbb5.b668) > Configured speed auto, actual unknown, configured duplex fdx, actual > unknown > Member of L2 VLAN ID 1, port is untagged, port state is BLOCKING > STP configured to ON, priority is level0, flow control enabled > mirror disabled, monitor disabled > Not member of any active trunks > Not member of any configured trunks > No port name > Internet address is 192.168.0.77/24 <http://192.168.0.77/24> , MTU 1518 > bytes, encapsulation ethernet > 300 second input rate: 0 bits/sec, 0 packets/sec, 0.00% utilization > 300 second output rate: 0 bits/sec, 0 packets/sec, 0.00% utilization > 991 packets input, 77378 bytes, 0 no buffer > Received 581 broadcasts, 410 multicasts, 0 unicasts > 0 input errors, 0 CRC, 0 frame, 0 ignored > 0 runts, 0 giants, DMA received 0 packets > 0 packets output, 0 bytes, 0 underruns > Transmitted 0 broadcasts, 0 multicasts, 0 unicasts > 0 output errors, 0 collisions, DMA transmitted 0 packets > ServerIronGT E-1# > > +++++ > > Thanks much, everyone. > > ------------------------------ > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > > > * > **Seth R. Fiermonti > *Sr. Systems Engineer > 7 Technology Dr > North Chelmsford, MA > Office: 603.397.5007 > Mobile: 781.632.6052 > www.brocade.com > > >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
