* [email protected] (Chuck Ufarley) [Fri 20 Feb 2009, 18:55 CET]:
This might be a silly question, but I can't get a port to come up on a
ServerIron. I enabled the interface and connected it properly to a
FES-X2402 switch, but the J-B16GC and the J-B2Gx ports just won't come up
and forward. The cards have worked in other configs, but I can't get
anything to come out of "blocking" mode. Here are the shows (any help
greatly appreciated):
[..]
ServerIronGT E-1#sho int e 4/9
GigabitEthernet4/9 is down, line protocol is down
Your port is down. The interface, the cable or the other side is
broken. Test with different patch cables, a different port on this SI
and different equipment on the other side, e.g. a laptop.
And this:
Member of L2 VLAN ID 1, port is untagged, port state is BLOCKING
is because the port is enabled but down, not due to your configuration.
Is the FESX side set for autonegotiation? Unless you used a crossover
cable you need auto-MDI/MDIX.
-- Niels.
--
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
