Hi Maxim,
Thank you for thinking with me. The following modules are in place.
Is there anything I need to replace/add?
sh module
==========================================================================
*** BigIron RX-4 CHASSIS ***
Module Status Ports Starting MAC
M1 (left): RX-BI-MR2 Management Module (High Value) Active
M2 (right):
F1: RX-BI-SFM1 Switch Fabric Module OK
F2: RX-BI-SFM1 Switch Fabric Module OK
F3: RX-BI-SFM1 Switch Fabric Module not present
S1: RX-BI-4XG 4-port 10GbE Module CARD_STATE_UP 4 000c.dbf5.1200
S2:
S3: RX-BI-2XG 2-port 10GbE Module CARD_STATE_UP 2 000c.dbf5.1200
S4: RX-BI-2XG 2-port 10GbE Module CARD_STATE_UP 2 000c.dbf5.1200
==========================================================================
Pieter Taks
Verzonden: donderdag 24 februari 2011 7:59
Hi Pieter,
I think it's a limitation of management module - I had the same problem on
NetIron: MLX module supports maximum 512 BGP sessions, XMR maximum 1024
sessions.
What management module do you have?
Maxim Tuliuk
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
