Hello everyone,
We have a RX-BI-4XG module in a reboot loop. Reloaded
boot/monitor/ironware images to it, but does not help. In rconsole on
boot i see the following not very promising information:
Error: 0x08040001 - error in fap10m_i2c_write(): Cannot access chip
(0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000)
Name: SAND_GEN_ERR: General error code (unspecified).
Error: 0x08040001 - error in fap10m_eci_write(): Cannot access chip
(0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000)
Name: SAND_GEN_ERR: General error code (unspecified).
Error: 0x0844003c - General error in sand_mem_write()
(0x0000000b,0x400000f0,0x00000004,0x00000000,0x00000000,0x00000000)
Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports:
Failed to write to the chip
Error: 0x180c003c - error in fap10m_mem_write()
(0x00000001,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000)
Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports:
Failed to write to the chip
i2c time out
i2c write addr 000000e2 failed
i2c time out
Anyone seen this before? Fixable or hardware issue?
Thanks in advance,
Rens
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
