Thanks for the replies so far. Some more information:
LP-5 Monitor>diag fap10m cpu-bus
FAP 0 CPU Bus Test Passed
FAP 1 CPU Bus Test FAILED
FAP 1 Data Bus Test Failed, expected aaaaaaaa actual aaaaaa8a
FAP 2 CPU Bus Test Passed
FAP 3 CPU Bus Test Passed
No errors on "diag fap10m 0" command. When running "diag fap10m 1" it
starts to boot (strange?) and i'm seeing the same errors as earlier. The
strange thing is when i test the sdram using "diag prestera sdram" i get
a Passed on all sdram modules.
Rens
On 04/17/2013 12:09 AM, Josh Farrelly wrote:
Looks to me like a good candidate for a hardware issue. If a power
off/power on and reload of firmwares don't resolve it's usually quite
broken.
Regards,
JF
From: Rens Ariens - YISP <[email protected] <mailto:[email protected]>>
Date: Wednesday, 17 April 2013 7:28 AM
To: "[email protected] <mailto:[email protected]>"
<[email protected] <mailto:[email protected]>>
Subject: [f-nsp] RX-BI-4XG in reboot loop
Hello everyone,
We have a RX-BI-4XG module in a reboot loop. Reloaded
boot/monitor/ironware images to it, but does not help. In rconsole on
boot i see the following not very promising information:
Error: 0x08040001 - error in fap10m_i2c_write(): Cannot access chip
(0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000)
Name: SAND_GEN_ERR: General error code (unspecified).
Error: 0x08040001 - error in fap10m_eci_write(): Cannot access chip
(0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000)
Name: SAND_GEN_ERR: General error code (unspecified).
Error: 0x0844003c - General error in sand_mem_write()
(0x0000000b,0x400000f0,0x00000004,0x00000000,0x00000000,0x00000000)
Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports:
Failed to write to the chip
Error: 0x180c003c - error in fap10m_mem_write()
(0x00000001,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000)
Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports:
Failed to write to the chip
i2c time out
i2c write addr 000000e2 failed
i2c time out
Anyone seen this before? Fixable or hardware issue?
Thanks in advance,
Rens
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
