Looks to me like a good candidate for a hardware issue. If a power off/power on and reload of firmwares don't resolve it's usually quite broken.
Regards, JF From: Rens Ariens - YISP <[email protected]<mailto:[email protected]>> Date: Wednesday, 17 April 2013 7:28 AM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: [f-nsp] RX-BI-4XG in reboot loop Hello everyone, We have a RX-BI-4XG module in a reboot loop. Reloaded boot/monitor/ironware images to it, but does not help. In rconsole on boot i see the following not very promising information: Error: 0x08040001 - error in fap10m_i2c_write(): Cannot access chip (0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000) Name: SAND_GEN_ERR: General error code (unspecified). Error: 0x08040001 - error in fap10m_eci_write(): Cannot access chip (0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000) Name: SAND_GEN_ERR: General error code (unspecified). Error: 0x0844003c - General error in sand_mem_write() (0x0000000b,0x400000f0,0x00000004,0x00000000,0x00000000,0x00000000) Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports: Failed to write to the chip Error: 0x180c003c - error in fap10m_mem_write() (0x00000001,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000) Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports: Failed to write to the chip i2c time out i2c write addr 000000e2 failed i2c time out Anyone seen this before? Fixable or hardware issue? Thanks in advance, Rens
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
