I'd bet on hardware issue based on the error messages. Did you try reinstalling the module?
On Tue, Apr 16, 2013 at 1:28 PM, Rens Ariens - YISP <[email protected]> wrote: > Hello everyone, > > We have a RX-BI-4XG module in a reboot loop. Reloaded > boot/monitor/ironware images to it, but does not help. In rconsole on boot > i see the following not very promising information: > > Error: 0x08040001 - error in fap10m_i2c_write(): Cannot access chip > (0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000) > Name: SAND_GEN_ERR: General error code (unspecified). > Error: 0x08040001 - error in fap10m_eci_write(): Cannot access chip > (0x2061b8e8,0xc0010000,0x400000f0,0x00000004,0x00000000,0x00000000) > Name: SAND_GEN_ERR: General error code (unspecified). > Error: 0x0844003c - General error in sand_mem_write() > (0x0000000b,0x400000f0,0x00000004,0x00000000,0x00000000,0x00000000) > Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports: > Failed to write to the chip > Error: 0x180c003c - error in fap10m_mem_write() > (0x00000001,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000) > Name: SAND_MEM_WRITE_006: Procedure sand_mem_write() reports: > Failed to write to the chip > i2c time out > i2c write addr 000000e2 failed > i2c time out > > Anyone seen this before? Fixable or hardware issue? > > Thanks in advance, > > Rens > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
