Hello Eric, I have been running CER-RT as route reflectors and MPLS PEs for our "small" POPs just fine.
Now, if you are looking for metro switchs as a replacement for Cisco ME3600, you should probably take a look at the CES switchs destined for that typical use case. Again, it all depends on your requirements/needs/sizing which you didn't specify. HTH. Le 29 août 2013 à 00:31, "Eric Louie" <[email protected]> a écrit : > I’m considering using the CER 2000 as a mpls PE switch. I have been told > that the CER-RT can also be used as an Internet edge switch (will hold > multiple BGP tables) > > I’m interested in your experiences in configuration and operation in either > application. What are you using for CE devices? (Brocade doesn’t seem to > have a branch office router) > > (Currently using Cisco ME3600-X for PE and c871 for CE) > > much appreciated, > Eric Louie > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
