What’s the difference between the CER and the CES? From the local Systems Engineer, he says “L3 VPNs on the CER, L2 VPNs on the CES”. Any other notable differences?
much appreciated, Eric Louie From: Youssef Bengelloun-Zahr [mailto:[email protected]] Sent: Wednesday, August 28, 2013 3:45 PM To: Eric Louie Cc: foundry-nsp Subject: Re: [f-nsp] NetIron CER 2000 as a metro switch Hello Eric, I have been running CER-RT as route reflectors and MPLS PEs for our "small" POPs just fine. Now, if you are looking for metro switchs as a replacement for Cisco ME3600, you should probably take a look at the CES switchs destined for that typical use case. Again, it all depends on your requirements/needs/sizing which you didn't specify. HTH. Le 29 août 2013 à 00:31, "Eric Louie" <[email protected]> a écrit : I’m considering using the CER 2000 as a mpls PE switch. I have been told that the CER-RT can also be used as an Internet edge switch (will hold multiple BGP tables) I’m interested in your experiences in configuration and operation in either application. What are you using for CE devices? (Brocade doesn’t seem to have a branch office router) (Currently using Cisco ME3600-X for PE and c871 for CE) much appreciated, Eric Louie _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
