Hi Dennis, I don't see you changing the ip6 system-max param anywhere... looks like your max is 245760 for ipv6-cache/route, but it is currently set to 65536.
You need to add a system-max ipv6-cache/ipv6-route to your config and then you will need a reload. Also, are you running all -X modules in this device? -- Eldon Koyle On Thu, Mar 10, 2016 at 8:35 AM, Dennis op de Weegh <[email protected]> wrote: > Hi, > > > > We have a Brocade MLXe-4 with one 4x 10 Gbit card and HSF’s. > > > > We get this warning in our logs: > > > > CAM IPv6 partition warning: total 65536 (reserved 0), free 3276, slot 1, > ppcr 0 > > > > But we have 27629 +- IPv6 routes (including internal routes)? > > > > #show run | inc cam > > cam-partition profile ipv4-ipv6-2 > > > > #show run | inc system-max > > system-max vlan 4095 > > system-max rstp 128 > > system-max ip-cache 590000 – setting value next week to 768000 > > system-max ip-route 590000 – setting value next week to 768000 > > system-max virtual-interface 4095 > > > > > > #show default values | inc ipv6 > > ipv6-cache 65536 245760 65536 65536 65536 > Yes > > ipv6-route 65536 245760 65536 65536 65536 > Yes > > ipv6-mcast-cam 2048 16384 2048 2048 2048 > No > > ipv6-vrf-route 128 16384 128 128 128 > Yes > > ipv6-receive-cam 0 8192 0 0 0 > No > > > > > > system-max for ipv6 is default set to max.? > > > > > > > > > > Regards, > > > > Dennis > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
