Hi Eldon, Card 1 is a NI-XMR-10Gx4
With the cam profile 768k IPv4 routes and 64k Ipv6 routes (Same number of routes as the BR-MLX-10Gx4-x card). Kind regards/Met vriendelijke groet, Dennis op de Weegh Bitency Willem van Oranjestraat 9 4931NJ Geertruidenberg Kvk nummer: 20144338 BTW nummer: NL213538519B01 W: www.bitency.nl E: [email protected] T: +31 (0)162 714066 -----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens Eldon Koyle Verzonden: donderdag 10 maart 2016 19:13 Aan: Dennis op de Weegh <[email protected]> CC: [email protected] Onderwerp: Re: [f-nsp] Brocade cam profile / System max values Dennis, I guess I mis-read your question. Please provide the output of 'show module'. I suspect that slot 1 is not a -X card (1M IPv4 routes max), but a NI-MLX-10Gx4 (512K ipv4 routes max). -- Eldon Koyle On Thu, Mar 10, 2016 at 11:09 AM, Eldon Koyle <[email protected]> wrote: > Hi Dennis, > > I don't see you changing the ip6 system-max param anywhere... looks > like your max is 245760 for ipv6-cache/route, but it is currently set > to 65536. > > You need to add a system-max ipv6-cache/ipv6-route to your config and > then you will need a reload. Also, are you running all -X modules in > this device? > > -- > Eldon Koyle > > > On Thu, Mar 10, 2016 at 8:35 AM, Dennis op de Weegh <[email protected]> wrote: >> Hi, >> >> >> >> We have a Brocade MLXe-4 with one 4x 10 Gbit card and HSF’s. >> >> >> >> We get this warning in our logs: >> >> >> >> CAM IPv6 partition warning: total 65536 (reserved 0), free 3276, slot >> 1, ppcr 0 >> >> >> >> But we have 27629 +- IPv6 routes (including internal routes)? >> >> >> >> #show run | inc cam >> >> cam-partition profile ipv4-ipv6-2 >> >> >> >> #show run | inc system-max >> >> system-max vlan 4095 >> >> system-max rstp 128 >> >> system-max ip-cache 590000 – setting value next week to 768000 >> >> system-max ip-route 590000 – setting value next week to 768000 >> >> system-max virtual-interface 4095 >> >> >> >> >> >> #show default values | inc ipv6 >> >> ipv6-cache 65536 245760 65536 65536 65536 >> Yes >> >> ipv6-route 65536 245760 65536 65536 65536 >> Yes >> >> ipv6-mcast-cam 2048 16384 2048 2048 2048 >> No >> >> ipv6-vrf-route 128 16384 128 128 128 >> Yes >> >> ipv6-receive-cam 0 8192 0 0 0 >> No >> >> >> >> >> >> system-max for ipv6 is default set to max.? >> >> >> >> >> >> >> >> >> >> Regards, >> >> >> >> Dennis >> >> >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
