Hi Eldon, #sh ipv6 route summary IPv6 Routing Table - 27613 entries: 21 connected, 1 static, 0 RIP, 0 OSPF, 27591 BGP, 0 ISIS Number of prefixes: /16:1 /19:2 /20:9 /21:3 /22:4 /23:4 /24:20 /25:5 /26:14 /27:16 /28:73 /29:1006 /30:103 /31:84 /32:7446 /33:296 /34:199 /35:228 /36:1002 /37:136 /38:272 /39:127 /40:1340 /41:228 /42:177 /43:36 /44:1138 /45:127 /46:385 /47:248 /48:12544 /49:6 /50:4 /52:8 /54:3 /55:2 /56:95 /58:1 /60:4 /62:1 /64:205 /112:6 /126:3 /128:2 Nexthop Table Entry - 22 entries
Thanks! Regards, Dennis -----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens Eldon Koyle Verzonden: donderdag 10 maart 2016 19:28 Aan: Dennis op de Weegh <[email protected]> CC: [email protected] Onderwerp: Re: [f-nsp] Brocade cam profile / System max values Dennis, What version of code are you running? There could be a bug... What does 'sh ipv6 route summary' say? -- Eldon Koyle On Thu, Mar 10, 2016 at 11:15 AM, Dennis op de Weegh <[email protected]> wrote: > Hi Eldon, > > Card 1 is a NI-XMR-10Gx4 > > With the cam profile 768k IPv4 routes and 64k Ipv6 routes (Same number of > routes as the BR-MLX-10Gx4-x card). > > > > Kind regards/Met vriendelijke groet, > > Dennis op de Weegh > > > > Bitency > Willem van Oranjestraat 9 > 4931NJ Geertruidenberg > > Kvk nummer: 20144338 > BTW nummer: NL213538519B01 > > W: www.bitency.nl > E: [email protected] > T: +31 (0)162 714066 > > > > -----Oorspronkelijk bericht----- > Van: [email protected] [mailto:[email protected]] Namens Eldon Koyle > Verzonden: donderdag 10 maart 2016 19:13 > Aan: Dennis op de Weegh <[email protected]> > CC: [email protected] > Onderwerp: Re: [f-nsp] Brocade cam profile / System max values > > Dennis, > > I guess I mis-read your question. Please provide the output of 'show module'. > > I suspect that slot 1 is not a -X card (1M IPv4 routes max), but a > NI-MLX-10Gx4 (512K ipv4 routes max). > > -- > Eldon Koyle > > On Thu, Mar 10, 2016 at 11:09 AM, Eldon Koyle > <[email protected]> wrote: >> Hi Dennis, >> >> I don't see you changing the ip6 system-max param anywhere... looks >> like your max is 245760 for ipv6-cache/route, but it is currently set >> to 65536. >> >> You need to add a system-max ipv6-cache/ipv6-route to your config and >> then you will need a reload. Also, are you running all -X modules in >> this device? >> >> -- >> Eldon Koyle >> >> >> On Thu, Mar 10, 2016 at 8:35 AM, Dennis op de Weegh <[email protected]> wrote: >>> Hi, >>> >>> >>> >>> We have a Brocade MLXe-4 with one 4x 10 Gbit card and HSF’s. >>> >>> >>> >>> We get this warning in our logs: >>> >>> >>> >>> CAM IPv6 partition warning: total 65536 (reserved 0), free 3276, slot >>> 1, ppcr 0 >>> >>> >>> >>> But we have 27629 +- IPv6 routes (including internal routes)? >>> >>> >>> >>> #show run | inc cam >>> >>> cam-partition profile ipv4-ipv6-2 >>> >>> >>> >>> #show run | inc system-max >>> >>> system-max vlan 4095 >>> >>> system-max rstp 128 >>> >>> system-max ip-cache 590000 – setting value next week to 768000 >>> >>> system-max ip-route 590000 – setting value next week to 768000 >>> >>> system-max virtual-interface 4095 >>> >>> >>> >>> >>> >>> #show default values | inc ipv6 >>> >>> ipv6-cache 65536 245760 65536 65536 65536 >>> Yes >>> >>> ipv6-route 65536 245760 65536 65536 65536 >>> Yes >>> >>> ipv6-mcast-cam 2048 16384 2048 2048 2048 >>> No >>> >>> ipv6-vrf-route 128 16384 128 128 128 >>> Yes >>> >>> ipv6-receive-cam 0 8192 0 0 0 >>> No >>> >>> >>> >>> >>> >>> system-max for ipv6 is default set to max.? >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> Regards, >>> >>> >>> >>> Dennis >>> >>> >>> _______________________________________________ >>> foundry-nsp mailing list >>> [email protected] >>> http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
