Oops... looks like I forgot to reply-all at some point, but it is XMR management card + XMR 10Gx4 card in MLXe chassis running 05600fb.
Does anyone know if increasing other limits could be causing this? Especially the system-max virtual-interface 4095? Other than that, I think the next step might be to contact Brocade TAC :/. -- Eldon Koyle On Thu, Mar 10, 2016 at 11:30 AM, Dennis op de Weegh <[email protected]> wrote: > Hi Eldon, > > #sh ipv6 route summary > IPv6 Routing Table - 27613 entries: > 21 connected, 1 static, 0 RIP, 0 OSPF, 27591 BGP, 0 ISIS > Number of prefixes: > /16:1 /19:2 /20:9 /21:3 /22:4 /23:4 /24:20 /25:5 /26:14 /27:16 > /28:73 /29:1006 /30:103 /31:84 /32:7446 /33:296 /34:199 /35:228 > /36:1002 /37:136 /38:272 /39:127 /40:1340 /41:228 /42:177 /43:36 > /44:1138 /45:127 /46:385 /47:248 /48:12544 /49:6 /50:4 /52:8 /54:3 > /55:2 /56:95 /58:1 /60:4 /62:1 /64:205 /112:6 /126:3 /128:2 > Nexthop Table Entry - 22 entries > > Thanks! > > Regards, > > Dennis > > > -----Oorspronkelijk bericht----- > Van: [email protected] [mailto:[email protected]] Namens Eldon Koyle > Verzonden: donderdag 10 maart 2016 19:28 > Aan: Dennis op de Weegh <[email protected]> > CC: [email protected] > Onderwerp: Re: [f-nsp] Brocade cam profile / System max values > > Dennis, > > What version of code are you running? There could be a bug... > > What does 'sh ipv6 route summary' say? > > -- > Eldon Koyle > > > On Thu, Mar 10, 2016 at 11:15 AM, Dennis op de Weegh <[email protected]> wrote: >> Hi Eldon, >> >> Card 1 is a NI-XMR-10Gx4 >> >> With the cam profile 768k IPv4 routes and 64k Ipv6 routes (Same number of >> routes as the BR-MLX-10Gx4-x card). >> >> >> >> Kind regards/Met vriendelijke groet, >> >> Dennis op de Weegh >> >> >> >> Bitency >> Willem van Oranjestraat 9 >> 4931NJ Geertruidenberg >> >> Kvk nummer: 20144338 >> BTW nummer: NL213538519B01 >> >> W: www.bitency.nl >> E: [email protected] >> T: +31 (0)162 714066 >> >> >> >> -----Oorspronkelijk bericht----- >> Van: [email protected] [mailto:[email protected]] Namens Eldon Koyle >> Verzonden: donderdag 10 maart 2016 19:13 >> Aan: Dennis op de Weegh <[email protected]> >> CC: [email protected] >> Onderwerp: Re: [f-nsp] Brocade cam profile / System max values >> >> Dennis, >> >> I guess I mis-read your question. Please provide the output of 'show >> module'. >> >> I suspect that slot 1 is not a -X card (1M IPv4 routes max), but a >> NI-MLX-10Gx4 (512K ipv4 routes max). >> >> -- >> Eldon Koyle >> >> On Thu, Mar 10, 2016 at 11:09 AM, Eldon Koyle >> <[email protected]> wrote: >>> Hi Dennis, >>> >>> I don't see you changing the ip6 system-max param anywhere... looks >>> like your max is 245760 for ipv6-cache/route, but it is currently set >>> to 65536. >>> >>> You need to add a system-max ipv6-cache/ipv6-route to your config and >>> then you will need a reload. Also, are you running all -X modules in >>> this device? >>> >>> -- >>> Eldon Koyle >>> >>> >>> On Thu, Mar 10, 2016 at 8:35 AM, Dennis op de Weegh <[email protected]> wrote: >>>> Hi, >>>> >>>> >>>> >>>> We have a Brocade MLXe-4 with one 4x 10 Gbit card and HSF’s. >>>> >>>> >>>> >>>> We get this warning in our logs: >>>> >>>> >>>> >>>> CAM IPv6 partition warning: total 65536 (reserved 0), free 3276, slot >>>> 1, ppcr 0 >>>> >>>> >>>> >>>> But we have 27629 +- IPv6 routes (including internal routes)? >>>> >>>> >>>> >>>> #show run | inc cam >>>> >>>> cam-partition profile ipv4-ipv6-2 >>>> >>>> >>>> >>>> #show run | inc system-max >>>> >>>> system-max vlan 4095 >>>> >>>> system-max rstp 128 >>>> >>>> system-max ip-cache 590000 – setting value next week to 768000 >>>> >>>> system-max ip-route 590000 – setting value next week to 768000 >>>> >>>> system-max virtual-interface 4095 >>>> >>>> >>>> >>>> >>>> >>>> #show default values | inc ipv6 >>>> >>>> ipv6-cache 65536 245760 65536 65536 65536 >>>> Yes >>>> >>>> ipv6-route 65536 245760 65536 65536 65536 >>>> Yes >>>> >>>> ipv6-mcast-cam 2048 16384 2048 2048 2048 >>>> No >>>> >>>> ipv6-vrf-route 128 16384 128 128 128 >>>> Yes >>>> >>>> ipv6-receive-cam 0 8192 0 0 0 >>>> No >>>> >>>> >>>> >>>> >>>> >>>> system-max for ipv6 is default set to max.? >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Regards, >>>> >>>> >>>> >>>> Dennis >>>> >>>> >>>> _______________________________________________ >>>> foundry-nsp mailing list >>>> [email protected] >>>> http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
