Sorry, my email client keeps using the wrong from address for this list. On May 18, 2016 8:07 AM, "Eldon Koyle" <[email protected]> wrote:
> You can run 40G without stacking on the 7750, although you may need to > change some default stacking settings. What code version are you running? > > I suspect support for third-party breakout cables is very limited. > > -- > Eldon Koyle > On May 18, 2016 3:20 AM, "Franz Georg Köhler" <[email protected]> wrote: > >> Hello everyone, >> >> >> we recently installed our first ICX7750 in Breakout-Mode. >> >> While it was at first suprising for us that this switch can only either >> break out 40G into 4x10G or enable stacking, I see an interesting >> phaenomenon with the transceivers in breakout mode: >> >> Our (third party) transceivers do not work in breakout mode while they >> work fine in 40G-mode. >> Does anybody have an idea why this is the case? Is there any feature on >> the transceiver required for the breakout mode? >> >> This is what show media looks like with two identical transceivers (port >> 6 is in breakout mode): >> >> Port 1/2/1: Type : EMPTY >> Port 1/2/2: Type : EMPTY >> Port 1/2/3: Type : 40GE-SR4 100m (QSFP+) >> Port 1/2/4: Type : EMPTY >> Port 1/2/5: Type : EMPTY >> Port 1/2/6:1: Type : 40GE-SR4 100m (QSFP+) (Not supported) >> Port 1/2/6:2: Type : 40GE-SR4 100m (QSFP+) >> Port 1/2/6:3: Type : 40GE-SR4 100m (QSFP+) >> Port 1/2/6:4: Type : 40GE-SR4 100m (QSFP+) >> >> >> Best regards, >> >> Franz Georg Köhler >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp > >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
