Am 19.05.16 um 16:27 schrieb ekoyle+puck.nether.net at gmail.com (Eldon Koyle):
So you wanted to create a stack over a breakout cable?  I suspect there are
some hardware or software limitations that make that difficult for brocade
to implement.

No, we wanted to stack over the 40G interfaces and use one of the remaining 40G interfaces for break out. However, this is currently unsupported as you cannot enable stacking mode as long as one of the ports in configured in breakout mode.


Best regards,

Franz Georg Köhler
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp

Reply via email to