Hi I have had the same problem with my S800 and my NIZO BAUER. Friends have pronblemas with other cameras.
Is it a problem of film cartridges 100d? Hitting the cartridge several times before shooting. If you get stuck and re-tap. 2012/2/8 Jonathan <jdcap...@gmail.com> > Hi Kevin, > I had a similar problem with my 814xls. The same thing would happen when > my batteries were getting low. Not sure if you are having luck with other > types of film stock, but it is worth checking out if not. > Good luck, > Jonathan Capone > > Kevin Timmins <on-on...@hotmail.com> wrote: > > > > >Hi, > >I've had this happen quite a few times now whilst using different 1014's > and 814's. The camera's seem to think the 100D film has come to the end in > the cartridge and in the viewfinder the word END (or a red light appears). > However the film is barely a minute. It's really frustrating because once > it starts happening you can only film about 3 seconds at a time before the > camera stops the film again. > >In all my lower end cameras like the 310XL's or 514XL's there isn't a > problem and the cartridges in question seem to work perfectly. You can keep > filming even it the cartridge has actually come to an end. > >Does anyone have any clue why these two models are responding this way to > the 100D film stock or is this a common problem? Any help would be great as > I'm shooting a film on the weekend and need to remedy this pesky problem. > >Best Kevin > >_______________________________________________ > >FrameWorks mailing list > >FrameWorks@jonasmekasfilms.com > >https://mailman-mail5.webfaction.com/listinfo/frameworks > _______________________________________________ > FrameWorks mailing list > FrameWorks@jonasmekasfilms.com > https://mailman-mail5.webfaction.com/listinfo/frameworks >
_______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks