The crank is left hand threads Sent from my iPhone Sherman George 858-229-4368
On Sep 1, 2015, at 1:47 PM, George, Sherman <sgeo...@ucsd.edu<mailto:sgeo...@ucsd.edu>> wrote: As I remember the Rex o fader is left hand thread. Try turning it the other way. Sent from my iPhone Sherman George 858-229-4368 On Sep 1, 2015, at 1:02 PM, Ugo Bo <ugobodi...@gmail.com<mailto:ugobodi...@gmail.com>> wrote: Mmh penetrating oil didn't work (I used Wd-40), I think I applied a considerable torque (don't ask me how much)... I wonder how much the service can charge for having the job done... thanks anyway Livio 2015-08-31 16:42 GMT+02:00 Ugo Bo <ugobodi...@gmail.com<mailto:ugobodi...@gmail.com>>: Thanks Scott I'm going to have a try tonight with some unlocking oil. But the cog screw that's is stuck is a male one, which goes in the rewind spindle screw that's a female one, so heating the cog up should widen it making it stuck even more... And I can't heat up the spindle screw which is unaccessible without dismantling the camera... (and both of these things scare me a bit...) 2015-08-31 16:14 GMT+02:00 Scott Dorsey <klu...@panix.com<mailto:klu...@panix.com>>: Put a drop of kroil or some other penetrating oil on the cog. Maybe heat it up a little with a soldering iron. --scott _______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com<mailto:FrameWorks@jonasmekasfilms.com> https://mailman-mail5.webfaction.com/listinfo/frameworks _______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com<mailto:FrameWorks@jonasmekasfilms.com> https://mailman-mail5.webfaction.com/listinfo/frameworks _______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com<mailto:FrameWorks@jonasmekasfilms.com> https://mailman-mail5.webfaction.com/listinfo/frameworks
_______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks