Hi, On Tuesday 26 June 2012 16:32:18 Natacha Porté wrote:
I have also an X220. My experience differs a bit. The machine: FreeBSD X220.ovitrap.com 10.0-CURRENT FreeBSD 10.0-CURRENT #4: Thu Jun 21 14:29:15 WIT 2012 > * power button doesn't work: I'm used (on desktops too) to have ACPI > somehow make it so that pressing the power button triggers a clean > system shutdown, but it's not the case on my X220. Pressing the power > button for several seconds does trigger a hard power off, but that's not > what I'm interested in. > Both behaviours work. When I press the power button shortly, the machine shuts down. When I keep it pressed for a few seconds, the power is switched off. > * Disk led is never on, even when there is heavy disk activity. > That's a very minor annoyance, but it would still be nice to see it > solved. > Disk led works as expected. > * "Fn"+"Fsomething" keys don't work, except for "Fn"+F4: I would > consider them as functional if they sent some events to X (like > "Fn"+arrows correctly send XF86AudioPlay, XF86AudioPrev, XF86AudioNext > and XF86AudioStop) or if they were acted upon directly (like "Fn"+PgUp > correctly switches the ThinkLight). The light seems to be switched by the hardware or BIOS as it generates no event. The keys for display brightness up and down also do not generate an event on my machine. > > * Something seems wrong with beeps (system bell): the first beep > after booting sounds normal, but the following ones seem much faster > (higher pitch and shorter), as if the sampling rate was suddenly much > higher. I did not notice this. Erich _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "[email protected]"
