Hi Warner-san,
From: Warner Losh <[EMAIL PROTECTED]>
Date: Mon, 18 Jun 2001 23:31:37 -0600
::Thank you for the dmesg. I have a theory about what is going on, but
::need your help to test a patch since I cannot reproduce the problem
::here.
Unfortunately, patch did not seem to work.
I got the same panic as previously reported and trace seems the same too.
Here's the dmesg:
ACPI debug layer 0x0 debug level 0x0
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #3: Wed Jun 20 01:01:42 JST 2001
[EMAIL PROTECTED]:/usr/src/sys/compile/JKPC11
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 595574367 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (595.57-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 125108224 (122176K bytes)
Preloaded elf kernel "kernel" at 0xc0554000.
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00fdf50
acpi0: <SONY Z3 > on motherboard
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Control Method Power Button Device> on acpi0
acpi_pcib0: <Host-PCI bridge> on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcb0-0xfcbf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfc60-0xfc7f at device 7.2 on
pci0
pci_cfgintr_unique: hard-routed to irq 9
pci_cfgintr: 0:7 INTD routed to irq 9
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Philips Semiconductors hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 3 ports with 3 removable, self powered
umass0: Sony USB Memory Stick Slot, rev 1.10/1.31, addr 3
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
pci0: <serial bus, FireWire> at 8.0 (no driver attached)
pcm0: <Yamaha DS-1E (YMF744)> mem 0xfecf0000-0xfecf7fff irq 9 at device 9.0 on pci0
pci0: <simple comms> at 10.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem
0xfed00000-0xfedfffff,0xfecff000-0xfecfffff irq 9 at device 11.0 on pci0
fxp0: Ethernet address 08:00:46:0e:5a:c4
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci_cfgintr_unique: hard-routed to irq 9
pci_cfgintr: 0:12 INTA routed to irq 9
pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 9 at device 12.0 on pci0
pcic0: Memory mapped device, will work.
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
acpi_ec0: <embedded controller> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_acad0: Off Line
acpi_timer0: <24-bit timer at 3.579545MHz> on acpi0
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0F13> can't assign resources
pcic0: Event mask 0x9
ad0: 14403MB <HITACHI_DK23BA-15> [29264/16/63] at ata0-master UDMA33
pccard: card inserted, slot 0
pcic0: Event mask 0x9
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
Mounting root from ufs:/dev/ad0s2a
lock order reversal
1st 0xc04c30e0 mntvnode @ ../../ufs/ffs/ffs_vfsops.c:1007
2nd 0xc8a76c8c vnode interlock @ ../../ufs/ffs/ffs_vfsops.c:1016
sio2 at port 0x2f8-0x2ff irq 9 slot 0 on pccard0
sio2: type 16550A
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xc42efac0
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc03b6e08
stack pointer = 0x10:0xc8a7fb28
frame pointer = 0x10:0xc8a7fb34
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = resume, IOPL = 0
current process = 179 (pccardd)
Hope this helps,
Haro
=------------------------------------------------------------------------------
_ _ Munehiro (haro) Matsuda
-|- /_\ |_|_| Business Incubation Dept., Kubota Corp.
/|\ |_| |_|_| 1-3 Nihonbashi-Muromachi 3-Chome
Chuo-ku Tokyo 103-8310, Japan
Tel: +81-3-3245-3318 Fax: +81-3-3245-3315
Email: [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
