On Tue, Jan 21, 2003 at 09:25:39AM +0000, Matthew Seaman wrote:
> On Tue, Jan 21, 2003 at 10:21:55AM +1030, Tim Aslat wrote:
>
> > I have a M7MKA mainboard (Biostar) slot A Athlon, with a AMD751/756
> > chipset. According to the documentation I've found it has a winbond
> > W83782D hardware monitor which is supposed to be supported by healthd.
> >
> > My current attempt at kernel configuration has the following differences
> > from GENERIC.
> > ---- additional entries to GENERIC ------------------------
> > # trying to get smbus working for hardware monitoring
> > device smbus # Bus support, required for smb below.
> > device intpm
> > device alpm
> > device ichsmb
> > device viapm
> > device smb
> >
> > device iicbus # Bus support, required for
> > device iicbb
> > device ic
> > device iic
> > device iicsmb # smb over i2c bridge
> > device pcf0
> > ---- end addition entries -------------
> >
> > dmesg doesn't come up with any indication that smbus or smb devices are
> > found/configured and I'm beginning to tear my hair out.
>
> Well, you've done everything pretty much right so far --- however,
> although you seem to have added all of the possible variants of SMBus
> controller chips, your kernel isn't picking up the hardware on your
> motherboard. That might simply be because the exact chipset you have
> isn't recognised, although from what you've said above, I'd expect the
> amdpm driver to probe successfully.
Of course, immediately I sent the above, I noticed what was wrong with
that picture.
Try adding
device amdpm
to you kernel config...
Cheers,
Matthew
--
Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks
Savill Way
PGP: http://www.infracaninophile.co.uk/pgpkey Marlow
Tel: +44 1628 476614 Bucks., SL7 1TH UK
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
