X problems on i810 | AddScreen/ScreenInit failed

[Darren Spruell]

Greetz,

I'm trying to configure v4.7 to run X but am having a hard time getting the server to start.

I've followed the config instructions at http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html by doing the following steps:

Run XFree86 -configure
to create the default XF86Config.new
Run XFree86 -xf86config ./XF86Config.new
to ensure that it works w/my hardware
Edit it to taste, to change specifics for HorizSync, VertRefresh, and
the Display subsection under "Screen".

However, running 'XFree86 -xf86config ./XF86Config.new' after changing my config does not work. The output error is:

======================================================================
(==) VGA(0): Write-combining range (0xa0000,0x10000) was already clear

Fatal server error:
AddScreen/ScreenInit failed for driver 0
======================================================================

I followed through the part in the Advanced Configuration section about adding in support for agpgart and created the device node and added the following to /boot/loader.conf:
agp_load="YES"

dmesg now shows:
Preloaded elf module "agp.ko" at 0xc051a09c.
agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0

Here is the current XF86Config.new (non-working). The Monitor section was taken from a specs page on the Monitor (Gateway EV700). Full dmesg included below this:

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "MouseSystems"
Option "Device" "/dev/sysmouse"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Gateway"
ModelName "EV700"
HorizSync 30 - 69
VertRefresh 50 - 110
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "VGAClocks" # [<bool>]
Identifier "Card0"
Driver "vga"
VendorName "Intel"
BoardName "i810-dc100"
BusID "PCI:0:1:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (697.88-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6

Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 267124736 (260864K bytes)
avail memory = 254693376 (248724K bytes)
Preloaded elf kernel "kernel" at 0xc051a000.
Preloaded elf module "agp.ko" at 0xc051a09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00f35a0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810-DC100 (i810-DC100 GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem 0xff700000-0xff7fffff,0xff8ff000-0xff8fffff irq 3 at device 1.0 on pci1
fxp0: Ethernet address 00:03:47:0b:0e:20
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0
orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xccfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 14324MB <QUANTUM FIREBALLlct15 15> [29104/16/63] at ata0-master UDMA66
acd0: MODE_SENSE_BIG trying to write on read buffer
acd0: MODE_SENSE_BIG - NO SENSE asc=0x00 ascq=0x00 error=0x04
acd0: CDROM <CD-224E> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted


THANKS IN ADVANCE!!!

--
Darren Spruell
Sento IS Department
[EMAIL PROTECTED]


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message