> Each machine has static internal IPs and listed in the
> /etc/hosts so finding them is easy.
You dont have to worry about this. It should be fine that
they are in hosts.
(snip)
> >{192.168.0.0}--[freebsd-gateway]--{internet conn1}
> > (link)
> >{10.0.0.0}--[freebsd gateway]---{internet conn2}
> >
>
> How did you "link" the two machines....? I have 2 NICs
> in each box - 1 for external and 1 for internal.
In my case I just an other ethernet card.
Which would bring the total number of network cards to 3
instead of 2. This unfortunatly means that (with this
plan) you would need an other network connection between
the two machines.
Assume the following:
FreeBSD Machine on 192.168.0.0
<ethernet> to 192.168.0.0
<ethernet> to FreeBSD Machine 10.0.0.0
<internet connection>
FreeBSD Machine on 10.0.0.0
<ethernet> to 10.0.0.0
<ethernet> to FreeBSD Machine 192.168.0.0
<internet connection>
And you can buypass a hub/switch by using a
cross-over cable. A cross over cable is simply
an ethernet cable that maps outbound (TX & RX)
to incomming (RX & TX).
> Just have those two questions above inline..... thanks again.
Well, I seem to have answered at least one, whats the
other question?
> Best regards,
> Jack L. Stone,
> Administrator
>
> SageOne Net
> http://www.sage-one.net
> [EMAIL PROTECTED]
>
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
