On 05/14/15 09:31, jurgen...@t-online.de wrote:
Hi,
I am setting hw.usb.ehci.no_hs: 0 -> 1.
After that I connect my iPad. Speed still remains at HIGH according to
usbconfig.
"ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen1.2: <product 0x0020 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)
ugen0.2: <product 0x0020 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)
ugen1.3: <Mass Storage Device Generic> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON (250mA)
ugen0.4: <USB-PS2 Optical Mouse Logitech> at usbus0, cfg=0 md=HOST spd=LOW
(1.5Mbps) pwr=ON (98mA)
ugen0.3: <iPad Apple Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
(500mA)"
After issuing "usbconfig -d 0.1 reset" usbconfig shows this output and I have
to reboot to get my mouse back:
"ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen1.2: <product 0x0020 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)
ugen1.3: <Mass Storage Device Generic> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=ON (250mA)"
Jurgen
Try to set:
set hw.usb.ehci.no_hs=1
In the loader prompt before booting, if you are running 11-current.
--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
