I justed wanted to let those who are interested know, that installing a low 
budget USB 1.1 PCI Card fixed the problem. Virtualbox sucessfully recognizes 
the device.
Nevertheless iPhone-Syncing is not working, I learned this is because it 
requires at least USB 2.0.

This essentially is meaning that iTunes-Syncing for iOS-Devices is not 
available under FreeBSD-Virtualbox.


Betreff: Re: USB Virtualbox
Datum: Thu, 14 May 2015 17:37:17 +0200
Von: Hans Petter Selasky <h...@selasky.org>
An: "jurgen...@t-online.de" <jurgen...@t-online.de>,  "freebsd-usb@freebsd.org" 

On 05/14/15 12:20, jurgen...@t-online.de wrote:
> I am running freebsd 10. Setting hw.usb.ehci.no_hs=1 at the loader prompt 
> leads to the following usbconfig (with no devices available).
> ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) 
> pwr=SAVE (0mA)
> ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) 
> pwr=SAVE (0mA)
> That's really frustrating. Maybe I have to buy pci usb host controller and 
> try again? Or is this not a hardware related problem?


Maybe there is a missing driver for an OHCI or UHCI driver, which is 
needed for FULL speed operation. Can you check output from "pciconf 
-lv". Else you cannot force devices into FS mode unless using a FS HUB.


freebsd-usb@freebsd.org mailing list
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to