Hi,

how can I check if there is a missing driver?

This is the full output of "pciconf -lv". Again, thank you for your help.

"hostb0@pci0:0:0:0:     class=0x060000 card=0x75811462 chip=0xd1318086 rev=0x11 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor DMI'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:3:0:       class=0x060400 card=0x75811462 chip=0xd1388086 rev=0x11 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Core Processor PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
none0@pci0:0:8:0:       class=0x088000 card=0x00810062 chip=0xd1558086 rev=0x11 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor System Management Registers'
    class      = base peripheral
none1@pci0:0:8:1:       class=0x088000 card=0x00810062 chip=0xd1568086 rev=0x11 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor Semaphore and Scratchpad Registers'
    class      = base peripheral
none2@pci0:0:8:2:       class=0x088000 card=0x00810062 chip=0xd1578086 rev=0x11 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor System Control and Status Registers'
    class      = base peripheral
none3@pci0:0:8:3:       class=0x088000 card=0x00810062 chip=0xd1588086 rev=0x11 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor Miscellaneous Registers'
    class      = base peripheral
none4@pci0:0:16:0:      class=0x088000 card=0x00810062 chip=0xd1508086 rev=0x11 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor QPI Link'
    class      = base peripheral
none5@pci0:0:16:1:      class=0x088000 card=0x00810062 chip=0xd1518086 rev=0x11 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Core Processor QPI Routing and Protocol Registers'
    class      = base peripheral
ehci0@pci0:0:26:0:      class=0x0c0320 card=0x75811462 chip=0x3b3c8086 rev=0x05 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
hdac0@pci0:0:27:0:      class=0x040300 card=0x75811462 chip=0x3b568086 rev=0x05 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset High Definition Audio'
    class      = multimedia
    subclass   = HDA
pcib2@pci0:0:28:0:      class=0x060400 card=0x75811462 chip=0x3b428086 rev=0x05 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:1:      class=0x060400 card=0x75811462 chip=0x3b448086 rev=0x05 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset PCI Express Root Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:2:      class=0x060400 card=0x75811462 chip=0x3b468086 rev=0x05 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset PCI Express Root Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:0:28:3:      class=0x060400 card=0x75811462 chip=0x3b488086 rev=0x05 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset PCI Express Root Port 4'
    class      = bridge
    subclass   = PCI-PCI
ehci1@pci0:0:29:0:      class=0x0c0320 card=0x75811462 chip=0x3b348086 rev=0x05 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
pcib6@pci0:0:30:0:      class=0x060401 card=0x75811462 chip=0x244e8086 rev=0xa5 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:      class=0x060100 card=0x75811462 chip=0x3b028086 rev=0x05 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series Chipset LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
ahci1@pci0:0:31:2:      class=0x010601 card=0x75811462 chip=0x3b228086 rev=0x05 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset 6 port SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
none6@pci0:0:31:3:      class=0x0c0500 card=0x75811462 chip=0x3b308086 rev=0x05 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '5 Series/3400 Series Chipset SMBus Controller'
    class      = serial bus
    subclass   = SMBus
vgapci0@pci0:1:0:0:     class=0x030000 card=0x30361462 chip=0x68101002 rev=0x00 
hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    class      = display
    subclass   = VGA
none7@pci0:1:0:1:       class=0x040300 card=0xaab01462 chip=0xaab01002 rev=0x00 
hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD] nee ATI'
    class      = multimedia
    subclass   = HDA
re0@pci0:2:0:0: class=0x020000 card=0x75811462 chip=0x816810ec rev=0x03 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
    class      = network
    subclass   = ethernet
re1@pci0:3:0:0: class=0x020000 card=0x75811462 chip=0x816810ec rev=0x03 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
    class      = network
    subclass   = ethernet
none8@pci0:4:0:0:       class=0x0c0010 card=0x581d1462 chip=0x34031106 rev=0x00 
hdr=0x00
    vendor     = 'VIA Technologies, Inc.'
    device     = 'VT6315 Series Firewire Controller'
    class      = serial bus
    subclass   = FireWire
atapci0@pci0:5:0:0:     class=0x010185 card=0x75811462 chip=0x2363197b rev=0x03 
hdr=0x00
    vendor     = 'JMicron Technology Corp.'
    device     = 'JMB363 SATA/IDE Controller'
    class      = mass storage
    subclass   = ATA"


-----Original-Nachricht-----
Betreff: Re: USB Virtualbox
Datum: Thu, 14 May 2015 17:37:17 +0200
Von: Hans Petter Selasky <h...@selasky.org>
An: "jurgen...@t-online.de" <jurgen...@t-online.de>,  "freebsd-usb@freebsd.org" 
<freebsd-usb@freebsd.org>

On 05/14/15 12:20, jurgen...@t-online.de wrote:
> I am running freebsd 10. Setting hw.usb.ehci.no_hs=1 at the loader prompt 
> leads to the following usbconfig (with no devices available).
>
> ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) 
> pwr=SAVE (0mA)
> ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) 
> pwr=SAVE (0mA)
>
> That's really frustrating. Maybe I have to buy pci usb host controller and 
> try again? Or is this not a hardware related problem?
>

Hi,

Maybe there is a missing driver for an OHCI or UHCI driver, which is 
needed for FULL speed operation. Can you check output from "pciconf 
-lv". Else you cannot force devices into FS mode unless using a FS HUB.

--HPS




_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to